If you want to update/debrand your device, there are some known issues • some features will be disabled that your original firmware might have offered (Roaming options, SD Card sharing over wifi, AP isolation, and probably others) • once you flash your firmware there is no going back • It might get bricked (has happened to one person I got an email from, also downgrading firmware might be the cause of bricking too, this firmware version is Jun 13 2012 use DC unlocker or my nv-restorer tool to check your version first). • the device mac address will be changed to a default one, this isnt a problem unless you have more than one MF60 in your house as then they will clash • the IMEI of the device will be unreadable. I'm not sure if this causes any issues though • the device will no longer be recognized by DC-UNLOCKER which also doesn't matter because you have unlocked the device anyway. ![]() Weeds pilot script pdf. ZTE MF190 debranding i need urgent debrandet firmware for this model i tried with the file in support but it didnt start so i flashed orginal firmware back. The modem is unlocked but with o2 software i cannot make a connection. Sir i have a mf 190 modem to unlock but it not detected by dc-unlocker plz help. Post Cancel #8. ![]() I have made an NVRAM restorer tool to try and fix these issues caused by unlocking. See Thanks to everyone for sending me their nvm files! I recently bought a Telsta elite MF60 and it was working fine expect for the constant random disconnections that were driving me crazy! I thought I'd update the firmware, but there wasn't any available from Telstra or the manufacturer. After some googling I found an excellent guide on how to de-brand the device with a new firmware:D (see ). Sadly his method didn't seem to work for the Telstra elite model, or for me anyway and the Firmware installer would not let me skip the device version check error. So I debugged the MF60 Firmware installer and made a patch that will skip the error and let you install the Firmware to any MF60 branded device, no matter what version it is. (Just make sure you definitely have an MF60 before applying the firmware, and use at your own risk! Once you update your firmware, you can't go back!). (3.83 MB) (17.1 MB) (3 KB) • Install the windows MF60 drivers • Plug in the device and it should pick up new drivers and install them. Note: This didn't work out too well for me to begin with, so I also installed which once it detected the modem it installed the drivers correctly. You don't need to buy any credit for it. You just need to open the app, select ZTE modem and click the scan button.if it doesn't detect the device, reboot and try again. If it detects the device it will give you a brief summary of it, and you can just close the app because the device drivers have been installed correctly. • Remove the sim card and plug back into computer • Run the MF60 Firmware installer, do not close! Note: if you try to press the update button now, you will get the error 'The version is not matching! Please check the software version!' • While the installer is still open, run and apply my version checker & unlock patch.
0 Comments
Leave a Reply. |